A&D > Test and Measurement > AD-3255
- Measures the thickness of a variety of materials such as metal, glass, plastic, ceramic and epoxy
- Measures Wide measurement range from 0.8 to 300mm
0.01 mm display resolution (display can switch between 0.01/0.1mm) - Equipped with scan mode for measuring minimum thickness range
- Three types of probes can be used to suit your needs
AD-3255-02(Standard probe) Measurement range from 0.8 to 200.0mm - AD-3255-03(Option ) Measurement range from 1.0 to 300.0mm
- AD-3255-04(Option ) Measurement range from 2.0 to 300.0mm
- Comes with 4 mm equivalent test piece for Zero point calibration for probe.
- The thickness of an object excluding paints and coatings can be measured with Echo-echo mode using AD-3255-04 probe.
(Measurement range from 4.0～30.0mm) - Sound velocity calibration is possible
(Single point and two-point calibration as well as numerical input calibration are possible, configuration and calibration data are recorded) - Coupling status displayed for contact status confirmation
- Backlight for use in dark environments
|
| AD-3255-03 5MHz probe Measurement range from 1.0 to 300.0mm |
AD-3255-04 5MHz probe Measurement range from 2.0 to 300.0mm |
 |
 |
Measurement Principle of Ultrasonic Thickness Gauge (Sound Velocity Adjustment) |
The measurement method of an ultrasonic thickness gauge. |
 |
 |
| In an ultrasonic thickness gauge, ultrasonic waves emitted from a sensor called a probe are reflected on the opposite side of the object to be... Read More >> |
In ultrasonic thickness measurement, there are five representative measurement methods... Read More >> |